MOFs/水凝胶复合材料的制备及其应用研究

金属有机框架(MOFs)具有大量的孔隙结构和活性位点,在气体吸附、催化、医疗等领域均发挥了巨大的作用。MOFs是晶体粉末,具有脆性较大、在水中易分解和不易回收等缺点,从而限制了其应用。通过MOFs与柔性高分子的复合,特别是与水凝胶的复合,极大地改善了复合材料的柔顺性、可回收和可加工性等特性,进一步拓宽了MOFs的应用领域。本文详细阐述了基于水凝胶MOFs原位生成法、MOFs /水凝胶同时生成法和水凝胶包裹MOFs法等三种不同方法制备MOFs/水凝胶复合材料的研究进展,并对上述三种制备方法的特点及其产物特征进行了总结,进一步归纳了复合材料在生物医药、催化、废水处理和气体吸附等领域的应用。最后,对MOFs/水凝胶复合材料制备方法的改进和复合材料应用前景进行了深入讨论和展望。     

空心六边形镍钴硫化物/RGO复合物的合成及其超级电容性能

通过两步法制备了一种空心六边形镍钴硫化物(HHNCS)与还原氧化石墨烯(RGO)的纳米复合材料HHNCS/RGO。利用XRD,SEM,TEM和Raman光谱等对复合物进行表征,发现镍钴硫化物为空心六边形结构,并且均匀地附着在RGO的表面。该纳米复合物用作超级电容器电极表现出优异的电化学性能。在电流密度为1 A·g-1时比电容为927 F·g-1;当电流密度增大到20 A·g-1时,比电容仍高达724 F·g-1,表明材料拥有较好的倍率性能。此外,在电流密度5 A·g-1下循环2 000次后比电容保留有初始值的93%,显示出优异的循环稳定性。HHNCS/RGO优异的电容性能主要是由于RGO的存在不仅增强了材料的导电性,而且作为理想的载体分散HHNCS纳米片。HHNCS/RGO纳米复合物优异的电化学性能使其在超级电容器电极材料领域具有应用前景。     

镧系离子掺杂的近红外复合光催化剂的合成研究进展

近红外光能量占太阳能的44%,但是传统半导体光催化剂难以利用近红外光,因此制备近红外光催化剂是近几年来的研究热点。本文阐述了镧系离子掺杂的近红外光催化剂催化的基本原理,综述了镧系离子掺杂上转换纳米材料/半导体复合近红外光催化剂的合成方法及特点,重点介绍了外延生长法,静电纺丝法与化学组装法。并对这些近红外光催化材料在光降解污染物和光解水领域的应用进行了总结并对其应用前景进行了展望。     

A novel aptasensor based on 3D-inorganic hybrid composite as immobilized substrate for sensitive detection of platelet-derived growth factor

A novel electrochemical detection approach for platelet-derived growth factor(PDGF) via "sandwich"structure is reported in this paper. 3D-4MgCO_3 Mg(OH)_2 4H_2O-Au NPs inorganic hybrid composite was utilized as immobilized substrate for sensitive PDGF detection and Pt-Au bimetallic nanoparticles were labelled on PDGF aptamer to indirectly detect PDGF for the first time. The proposed aptasensor exhibited a high catalytic efficiency towards reduction of H_2O_2, hence the sensitive detection of PDGF was achieved.Results showed that the aptasensor exhibited excellent linear response to PDGF, in the range of 0.1 pg/m L–10 ng/m L(4 fmol/L–400 pmol/L), with detection limit of 0.03 pg/m L(1.2 fmol/L).     

Chitosan-based self-healing hydrogel for bioapplications

A chitosan-based biocompatible self-healing hydrogel has been facilely prepared and used for bioapplications.     

耐高温端乙炔基聚醚酰亚胺改性含硅芳炔树脂

采用预共聚法,以含硅芳炔树脂(PSA)和端乙炔基聚醚酰亚胺(PEI)为原料,制备了端乙炔基聚醚酰亚胺改性的含硅芳炔(PEI-PSA)树脂及其与T300碳纤维平纹布的复合材料T300/PEI-PSA。通过动态热机械分析(DMA)和X射线能谱仪(EDS)研究了溶剂、溶液浓度、反应温度对预共聚反应的影响,确定了预共聚反应的最佳条件,得到了均匀分散的PEI-PSA树脂。通过红外光谱(FT-IR)、核磁共振氢谱(1 H-NMR)、差示扫描量热(DSC)、热失重(TG)、DMA和EDS等表征了PEI、PEI-PSA树脂及T300/PEI-PSA复合材料的结构和性能。结果表明,当PEI质量分数为20%时,PEI-PSA树脂浇铸体的弯曲强度达44.5 MPa,较PSA树脂浇铸体提高了90.2%;T300/PEI-PSA复合材料的弯曲强度达602.7 MPa,较T300/PSA复合材料的弯曲强度提高了124%。     

Synthesis and catalytic performance of bimetallic NiMo- and NiW-ZSM-5/MCM-41 composites for production of liquid biofuels

This work presents a synthesis of bimetallic NiMo and NiW modified ZSM-5/MCM-41 composites and their heterogeneous catalytic conversion of crude palm oil( CPO) to biofuels. The ZSM-5/MCM-41 composites were synthesized through a self-assembly of cetyltrimethylammonium bromide( CTAB) surfactant with silica-alumina from ZSM-5 zeolite,prepared from natural kaolin by the hydrothermal technique. Subsequently,the synthesized composites were deposited with bimetallic NiMo and NiW by impregnation method. The obtained catalysts presented a micro-mesoporous structure,confirmed by XRD,SEM,TEM,EDX,NH_3-TPD,XRF and N_2 adsorption-desorption measurements. The results of CPO conversion demonstrate that the catalytic activity of the synthesized catalysts decreases in the series of NiMo-ZSM-5/MCM-41 NiW-ZSM-5/MCM-41 Ni-ZSM-5/MCM-41 Mo-ZSM-5/MCM-41 W-ZSM-5/MCM-41 NiMo-ZSM-5 NiW-ZSM-5 ZSM-5/MCM-41 ZSM-5 MCM-41. It was found that the bimetallic NiMo-and NiW-ZSM-5/MCM-41 catalysts give higher yields of liquid hydrocarbons than other catalysts at a given conversion. Types of hydrocarbon in liquid products,identified by simulated distillation gas chromatography-flame ionization detector( SimDis GC-FID),are gasoline( 150-200 ℃; C5-12),kerosene( 250-300 ℃; C5-20) and diesel( 350 ℃; C7-20).Moreover,the conversion of CPO to biofuel products using the NiMo-and NiW-ZSM-5/MCM-41 catalysts offers no statistically significant difference( P 0.05) at 95% confidence level,evaluated by SPSS analysis.     

Hβ/Al-SBA-15介微孔复合分子筛负载Ni-W催化剂对萘加氢裂化制BTX的催化性能

采用后合成法制备Hβ/Al-SBA-15复合分子筛,利用XRD、N_2吸附、Py-IR、NH_3-TPD、SEM和TEM等手段进行表征。用浸渍法将Ni-W活性组分担载在Hβ/Al-SBA-15载体上,制备Ni-W/Hβ/Al-SBA-15催化剂,以萘为模型化合物,考察该催化剂的加氢裂化性能。结果表明,所合成的Hβ/Al-SBA-15复合分子筛既有介孔结构又有微孔结构,并同时具有B酸和L酸中心,酸性强于SBA-15。具有适度酸性位和介微孔结构的Ni-W/Hβ/Al-SBA-15催化剂,对萘加氢裂化具有较高的萘转化率和BTX选择性,分别为96%和61.1%。     

Ni-Mg复合催化剂催化裂解CH_4制氢动力学研究

基于定温热重实验,建立了甲烷催化裂解反应动力学模型和催化剂表面积炭失活动力学模型。其中,甲烷催化裂解动力学模型将初始产氢速率视为催化剂未积炭条件下的动力学基础数据;催化剂表面积炭失活动力学则基于甲烷催化裂解速率的降低。实验使用Ni-Mg复合催化剂,分别在535、585、635℃,甲烷分压10~4、2×10~4、3×10~4Pa条件下展开甲烷催化裂解动力学特性研究。结果表明,甲烷催化裂解的反应级数为0.5,活化能为82 k J/mol;Ni-Mg复合催化剂反应失活级数为0.5,催化剂失活活化能为118 k J/mol。实验条件下均制得了多壁碳纳米管。